產品中心您當前的位置：首頁 > 產品中心 > 愛斯佩克ESPEC環境試驗箱 > 恒溫恒濕試驗箱 > SETH-Z-042U愛斯佩克ESPEC調溫調濕試驗箱
基礎信息Product information
產品名稱：愛斯佩克ESPEC調溫調濕試驗箱
產品型號：SETH-Z-042U
更新時間：2024-08-18
產品簡介：
愛斯佩克ESPEC調溫調濕試驗箱型號 ModelSETH-Z-022R ，SETH-Z-032R ，SETH-Z-042R ，SETH-Z-102R ，SETH-Z-022L ，SETH-Z-032L ，SETH-Z-042L ，SETH-Z-102L ，SETH-Z-032U ，SETH-Z-042U ，SETH-Z-102U
產品特性Product characteristics
愛斯佩克ESPEC調溫調濕試驗箱
型號 Model
SETH-Z-022R ，SETH-Z-032R ，SETH-Z-042R ，SETH-Z-102R ，SETH-Z-022L ，SETH-Z-032L ，SETH-Z-042L ，SETH-Z-102L ，SETH-Z-032U ，SETH-Z-042U ，SETH-Z-102U
電源 Power supply AC380V 3φ4W 50Hz
zui大電流 Maximum current(A) 14.6 14.6 14.6 23.9 16.9 16.9 16.9 30.9 21.7 21.7 40.4
功率 Power (KVA) 6.6 6.6 6.6 11.1 7.6 8.1 8.1 15.1 11.1 11.1 21.1
控制方式 Control mode
平衡調溫調濕方式(BTHC方式)
Balanced temperature and humidity control system (BTHC system)
使用環境溫 / 濕度 Operating temperature +5～+35℃ / ≤85%RH
性能Performance
溫度范圍 Temperature range
-20～+150℃/25～98%RH -40～+150℃/25～98%RH -70～+150℃/25～98%RH
溫度波動度 Temperature fl uctuation
±0.5℃以內 Within±0.5 ℃
溫度均勻度 Temperature uniformity
≤2.0℃
溫 / 濕度偏差 Temperature deviation
±2.0 ℃以內/+2-3%RH以內 Within±2.0 ℃/Within+2-3%RH
升溫時間 Temperature heat-up rate
-20～+150℃ 60分鐘以內
-20 ～+150℃ Within 60 min
-40～+150℃ 70分鐘以內
-40 ～+150℃ Within 70 min
-70～+150℃ 70分鐘以內
-70 ～+150℃ Within 70 min
降溫時間 Temperature pull-down rate
+20～-20℃ 45分鐘以內
+20 ～-20 ℃ Within 45 min
+20～-40℃ 60分鐘以內
+20 ～-40 ℃ Within 60 min
+20～-70℃ 80分鐘以內
+20 ～-70 ℃ Within 80 min
材料
Material
外殼材料 Exterior material 鉻不銹鋼板表面拉絲加工 Cr stainless steel plate (fi ber drawing)
內膽材料 Interior material
鉻-鎳不銹鋼板表面研磨加工 Cr-Ni stainless steel plate (2B polish)
隔熱材料 Insulation
硬質聚胺脂發泡+超細玻璃棉 Rigid polyurethane foam+Ultra-fi ne glass wool
制冷系統
Refrigeration
system
制冷方式 Refrigeration system
單級制冷(空冷式)
Mechanical Single-stage refrigeration system
(Air-cooled condenser)
復疊制冷(空冷式)
Mechanical cascade
refrigeration system
(Air-cooled condenser)
壓縮機 Compressor 全封閉往復式 Hermetically sealed rotary compressor
壓縮機容量 Refrigerator Capacity(KW) 1.1 2.2 2.2 2.2x2 2.2+2.2 4.4+4.4
節流裝置 Expansion Mechanism 電子膨脹閥 Electronic auto expansion valve system
熱力膨脹閥＋毛細管
Thermal expansion valve+Capillary
溫/濕度傳感器 Temperature(Humidity) Sensor
T 型熱電偶 / T 型熱電偶干濕球 Thermocouples T
溫/濕度控制器 Temperature(Humidity) Controller
P型計測裝置(觸摸式TFT6.5英寸顯示屏) P-instrumentation(6.5-inh TFT color LCD)
加濕供水
Water supply
方式 Water system 電磁泵供水系統 Electromagnetic Pump out system
水箱 Water tank 前置抽屜式 Pre-drawer
內容積 Inside capacity(L) 225 306 408 1000 225 306 408 1000 306 408 1000
內部尺寸
Inside dimensions W×H×D(mm)
W 500 600 600 1000 500 600 600 1000 600 600 1000
H 750 850 850 1000 750 850 850 1000 850 850 1000
D 600 600 800 1000 600 600 800 1000 600 800 1000
外部尺寸Outside dimensions W×H×D(mm)
W 910 1010 1010 1460 910 1010 1010 1460 1010 1010 1460
H 1815 1915 1915 2295 1815 1915 1915 2295 1915 1915 2295
D 980 1180 1180 1385 980 1180 1180 1385 1180 1180 1535
重量 Weight (kg) 300 335 345 545 310 345 355 580 385 390 595
標準配置 Fitting
觀察窗1個、電纜孔1個(Φ50mm 、位于左側面)、擱板擱條2套、萬向腳輪、箱體水平
調節支撐器、獨立溫度過升防止器、箱內照明燈(熒光)、時間信號端子、試樣電源控
制端子、箱門開啟/未鎖緊警示裝置等
Viewing window, cable port (Φ50mm . on the left side) , shelf and shelf bracket( 2 sets) , univer salcasters,casing leveling support, overheat protector, chamber la mp (fluorescent lamp), time signal terminal, specimen power supply control terminals, door unlock alarm device
*1：在環境溫度+23℃時，空載條件下測得的數據；
Measurement of circulation operation at +23℃ ambient temperature under no laod.
*2：外尺寸包括循環風機電機防護罩和腳輪的高度。
Including motor cover and casters.
愛斯佩克ESPEC調溫調濕試驗箱主要為各種工業制品在研發、生產、檢驗等各環節的試驗提供恒定濕熱及高低溫交變（濕熱）等試驗環境和試驗條件。基于ESPEC的平衡調溫調濕控制系統（BTHC），動態PID及水蒸氣分壓控制，技術成熟、精度*。產品綠色環保、省耗節能。通過相關接口均可進行網絡控制及數據采集。產品系列覆蓋電子器件、機電產品、材料能源、醫藥化工到汽車航天等行業廣泛需求。
適用標準：GB/T2423.1 / IEC60068-2-1、GB/T2423.3 / IEC60068-2-78、GB/T2423.4 / IEC60068-2-30、GB/T2423.34 / IEC60068-2-38、JESD22-A100-C、JESD22-A101-C。
溫度范圍-75～+180℃，濕度溫度10～98%RH。zui大可以進行4500W大負荷溫度試驗。溫變速率可達3℃/分以上。各種試驗條件啟動速度快，且到達設定點后無溫度及濕度過沖抖動現象（到達波動＜0.5℃），大功率冷凍加熱系統。容積100L/200L/500L/1000L/1200L/1500L/2000L
Z SERIES TEMPERATURE( &HUMIDITY) CHAMBER Z系列
本系列試驗箱適用于對工業產品進行濕熱試驗、高溫試驗、低溫試驗及高低溫漸變試驗，具有極限溫(濕)度范圍廣和實際溫(濕)度精度高的特點，經國家環境試驗設備質量監督中心檢測；符合“環境試驗設備條件"系列標準中的GB/T10586-2006(濕熱試驗箱技術條件)、GB/T10589-2008(低溫試驗箱技術條件)、GB/T10592-2008(高低溫試驗箱技術條件)、GB/T11158-2008(高溫試驗箱技術條件)的要求。
This series of chambers boast of wide rang of limit temperature (humidity) and high precision of actual temperature (humidity) and can be applied in
moist heat testing, high temperature testing, low temperature testing and testing of temperature gradually changing from high to low of the industrial
products. Through testing of the State Quality Supervision and Testing Center for the Environment Testing Equipment, the testing chambers are in
conformity with GB/T10586-2006 (Technical conditions for moist heat chamber), GB/T10589-2008 (Technical conditions for low temperature chamber),
GB/T10592-2008 (Technical conditions for high and low temperature chamber), GB/T11158-2008 (Technical conditions for high temperature chamber)
of the “Technical conditions for environment testing equipments".
本系列試驗箱，秉承日本愛斯佩克現行同類產品K系列之血脈，2007年的第二次改版，以用戶為本，致力于提高使用的舒適性和實用性。
This series of testing chambers carry forward the tradition of K-series, currently similar products of Espec Japan and had experienced the second remaking in 2007; they are customers-oriented and are devoted to improve the comfortable and practical nature.
1. 降低了整機噪音，由原先的73dB降至為66dB(國家標準為≤75dB)。
Noise of machine is lowered from 73dB to 66dB(national standard≤75dB).
2. 變更了加濕用水箱位置和方式；由原先的后置式改為前置抽屜式。
The position and the mode of the water tank for humidifying have been altered from the rear to the head-drawer water tank.
3. 變更了機械室的排散熱方向；由原先的后排風改為上排風(縮小了使用占地面積)。
The direction of heat dissipation has been altered from the rear to the top so that the machine occupies less space.
4. 變更腳輪形式；由原先的移動、水平調整一體化腳輪改為萬向輪、水平調整支撐分體形式。
The truckle has been alrered from the original model of supporting stands with wheels to direct its movements to a renewed model of supporting stands and wheels of universal directions.
功能特點 Function and features
Z系列調溫(調濕)試驗箱引進日本愛斯佩克*進技術國內*
Z Series temperature (&humidity) chamber have introduced the advanced technology
of Espec of Japan and are originated in the country
SET型產品能滿足以下標準 SET products can satisfy the following standards:
◎ GB-2423.1-2008(IEC68-2-1)試驗A：低溫試驗方法。
GB-2423.1-2008(IEC68-2-1)Testing A: Low temperature testing method.
◎ GB-2423.2-2008(IEC68-2-2)試驗B：高溫試驗方法。
GB-2423.2-2008(IEC68-2-2)Testing B：High temperature tesing method ．
◎ GJB360.8-87(MIL-STD-202F)高溫壽命試驗。
GJB360.8-87(MIL-STD-202F)High temperature life testing．
◎ GBJ150.3(MIL-STD-810D)高溫試驗方法。
GBJ150.3(MIL-STD-810D)High temperature method.
◎ GBJ150.4(MIL-STD810D)低溫試驗方法。
GBJ150.4(MIL-STD-810D)Low temperature method．
滿足標準 Standards satisfied
SETH型產品還能滿足 SETH products can also satisfy ：
◎ GB2423.3-93(IEC68-2-3)試驗Ca：恒定濕熱試驗方法。
GB2423.3-93(IEC68-2-3)Testing Ca：Constant moist heat testing method.
◎ GB2423.4-93(IEC68-2-30)試驗Db：交變濕熱試驗方法。
GB2423.4-93(IEC68-2-30)Testing Db：Alternate moist heat testing method．
◎ GJBl50.9-93(MIL-STD-810D)濕熱試驗方法。
GJBl50.9-93(MIL-STD-810D)Moist heat testing method．
*進簡捷的P計測裝置
Advanced and convenient P metering and measurement device
P計測裝置配置6.5英寸TFT液晶觸摸顯示屏，中文彩色顯示畫面，可進行豐富多彩的試驗程序設定，程序的編制采用人機對話方式，即使是初次使用者亦可無障礙地操作。僅需簡單的溫濕度值設定便可實現zui為省能源的自動運行模式。后備運行功能可縮短設備的停機時間，減少用戶的時間損耗。計裝能進行詳細的警示，故障內容顯示和故障履歷管理，為迅速正確處理警示，排除故障提供了方便。裝置的定時器功能實現了任意時間內預約自動啟動和停止設備運行。
P metering device is equipped with 6.5-inch TFT liquid crystal touch screen, and Chinese color display picture. Varied testing programs can be set on the device. The programs are edited through dialogue mode. Those use it for the first time can also operate without any obstacle. Automatic operation mode that can maximumly save energy will be realized through making the most simple temperature and humidity value setting. The function of back-up operation can shorten the halting time of the equipments and cut down time consumption for the users. The metering device can give detailed alarming, display the content of fault and manage the fault records to provide convenience for fault clearing. The function of timer of the device brings into reality the pre-set automatic starting and stopping operation of the device at any time.
靜電容式濕度傳感器(選購件)
Static volume humidity sensor (Option)
濕度測量突破傳統的干濕球測量方式，采用電容測定方式的濕度傳感器，不需要濕球紗布，克服了中國水質普遍較差而對濕度試驗的影響，簡化了使用程序，提高了產品運行時的可靠性。
Humidity metering has broken through the traditional method of dry and wet bulb metering. The humidity sensor utilizing the method of static volume determining needs no longer wet-bulb gauze and has overcome the defect of the generally poor water quality of China, and has simplified the use procedure and improved the reliability of the products in operation.
電子膨脹閥控制技術
Electronic expansion valve control technology
制冷系統采用電子膨脹閥對冷媒的流量和蒸發溫度進行控制，通過無級方式控制制冷能力，實現了制冷能力的無級調節，與毛細管的控制方式相比：穩定性強，節能效果明顯，溫濕度控制更快捷。
The cooling system employs electronic expansion valve to control the flow and evaporative temperature of the cooling medium, and controls cooling through stepless mode and has realized stepless regulation of cooling. Compared with capillary control, it has stronger stability, more various energy construction effect and more accurate controle temperature and humidity.
無紙記錄儀+CF卡+讀卡器(選構件)
Paperless recorder + CF card + carder reader (option)
采用高分辨率的5英寸單色液晶顯示器，具有曲線、棒圖、數字、總覽、歷史曲線，一覽等多種顯示方式. 多種數據保存格式和觸發功能可以更有效地保存數據，并且通過外部CF卡使數據得到雙重保護，即使突然斷電，也能對存儲數據進行保護；使用操作簡便，還可以通過PC對數據進行處理、打印和轉換用戶需要的格式。
It utilizes the 5-inch single-color liquid crystal display monitor with high resolution and has multipledisplay modecontaining cure, bar, digital, surf, historical curve and list etc.
Various kinds of data saving format and touch-off function can more effectively protect the data that can obtain double protection through the external CF card. Though
in case of sudden power cut-off, the data in memory can also be protected. It can be conveniently and simply operated and can handle, print the data through PC and
switch the format according to the need of the users.
